H301-NIKON-TI-SR

Stage compatibility: screws onto Nikon T and Ti-SR - comes with Sliding Lid
 
Magnetic inserts allow to use:
  • 35/60 mm Petri
  • 1x3 in. / 1x2 in. chambered slides
Features:
  • Sliding lid for easy pipetting
  • Optional lids available for Kohler Illumination, Laser Safety, Injection during imaging
  • Flexible chamber height thanks to the removable chamber riser and the optional Koheler Lid
  • Magnets allow easy interchange of chamber inserts
  • Magnetic locks hold Petri and Slides in correct position inside the chamber
  • Perfusion holes: 12 channels for 2.5mm O.D. tubings are available in chamber base
  • The chamber screws onto the Nikon T and Ti-SR rectangular stage with circular opening

 

H301-NIKON-TI-SR_480x320.JPG
  

Available Inserts

1x35-M single #1 35mm Petri-dish 1x35-M-single.JPG
1xGS-M-single #1 1x3in. chamberslide 1xGS-M-single.JPG
1xLABTEK-M-single #1 Lab-Tek 1x2 in. chambered cover glass 1xLABTEK-M-single.JPG
1xLABTEK-II-M-single #1 Lab-Tek II 1x2 in. chambered cover glass 1xLABTEK-II-single.JPG
1x60-M-single #1 60mm Petri-dish 1x60-M-single.JPG

Available LIDs

H301-KOEHLER LID-2 Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm H301-KOEHLER-LID-2.JPG
H301-INJECTION-LID-2 Glass lid with two small openings (sealed with flexible plastic) to allow injection or permanent access to the specimen. Compatible only with specimen holder 1x35 H301-INJECTION-LID-2.JPG
H301-LASER-INTERLOCK-LID-2 Glass lid with a safety switch that connects to the laser box. The switch turns off the laser, when the lid is lifted. Compatible only with specimen holder 1x35 H301-LASER-INTERLOCK-LID-2.JPG
H301-NIKON-TI-S withSlidingLid_600x600.jpg
H301-NIKON-TI-SR with Sliding Lid
H301-NIKON-TI-SRwithKoehlerLid_600x600.jpg
H301-NIKON-TI-SR with Koehler Lid
H301-NIKON-TI-SR-Lids_600x600.jpg
H301-NIKON-TI-SR - Available Lids

H301-NIKON-TI-SR-Sliding-Lid_Dimensions_600x600.jpg
H301-NIKON-TI-SR with Sliding Lid - Dimensions 
H301-NIKON-TI-SR-Koehler-Lid_Dimensions_600x600.jpg
H301-NIKON-TI-SR with Koelher Lid - Dimensions
H301-NIKON-TI-SR-Adapters_600x600.jpg
H301-NIKON-TI-SR - Magnetic Inserts
 
 

Customer care is our top priority

CONTACT US

Okolab S.r.l.

FACTORY NAPOLI: Via A. Olivetti, 1 - 80078 Pozzuoli, NA, Italy

FACTORY ROVERETO: Via delle Zigherane - Edificio B08.01, 38068 Rovereto, TN, Italy

 

  • Luca Lanzaro Ph.D
  •   Phone: +39 081 8062624
  •   E-mail: info[at]oko-lab[dot]com

Okolab USA Inc.

417 Thorn St., Suite 309, Sewickley - PA 15143, USA

 

  • Lara Petrak
  • Mobile: +1 (650) 410 0756
  • Rob Davison
  • Phone: +1 (650) 228 6154
  •   E-mail: usa[at]oko-lab[dot]com

Okolab Shanghai Co., Ltd.

Room 2604, Jiande Apartment, No. 9 Jiande Road, Huangpu District, Shanghai 200025, China

 

  • Pony Tong
  • Mobile: +86 18500508458
  •   E-mail: tong[at]oko-lab[dot]cn
 

COPYRIGHT © OKOLAB S.R.L. ALL RIGHT RESERVED. CERTIFIED ISO 9001.