Okolab - Gas Chambers

Cage Incubator

Models for any microscope on the market

Easy access

Removable front panel foe easy access to the scope

Humidity Module

Vibration free gas humidifier

Black out Panels

For fluorescence applications

LED inside

Foot pedal dimmable light

Gas Chamber

Stage Top Gas Chamber inside the enclosure

H201-K-FRAME - slided lid.png

Gas Chamber

Fits on the XY stage inside the enclosure

Gas Chamber

Perfusion holes availabel

Gas Chamber

Slim profile with Koehler Lid

Sample Holders

Great variety of Magnetic sample holders

OKO-Touch

Intuitive user interface

T Unit

Air Heater and T controller

Gas Controller

CO2 and CO2/O2 Units available

Smart Box

Data Logger and remote operation

Enclosure

Gas Chamber

Controllers

H301-diSPIM

The Okolab solution to enable long term experiments on ASI diSPIM set-up

Features:

Compatible with ASI diSPIM set-up
Operated by Okolab BOLD LINE temperature/gas/humidity controllers
It includes the specimen holder for 2"x3" inserts with rounded corners like the ASI I3078
Uniformly heated by means of embedded electric resistances both in the base and in the lid of the chamber
Collars for objectives in use, included
Quick opening chamber's design
Recommend humidity module: HM-ACTIVE

Koehler illumination ?

Remove the chamber riser and use the Koehler Lid

Perfusion ?

Each chamber features up to 12 holes for inlet and outler of perfusion tubings

Different sample holder ?

Change the chamber insert. It is a 5 seconds task with the magnetic sample holders

Keep the sample in the correct position by using the Magnetic Locks

H301-oSPIM

The Okolab solution to enable long term experiments on ASI oSPIM set-up.

Features:

Compatible with ASI oSPIM set-up
Operated by Okolab BOLD LINE temperature/gas/humidity controllers
It includes the specimen holder for 35mm Petri Dish
Uniformly heated by means of embedded electric resistances both in the base and in the lid of the chamber
Collar for objective in use, included
Recommend humidity module: HM-ACTIVE

Koehler illumination ?

Remove the chamber riser and use the Koehler Lid

Perfusion ?

Each chamber features up to 12 holes for inlet and outler of perfusion tubings

Different sample holder ?

Change the chamber insert. It is a 5 seconds task with the magnetic sample holders

Keep the sample in the correct position by using the Magnetic Locks

H201-PRIOR-NZ500

Stage compatibility: screws onto Prior NZ250/400/500 - comes with Koelher lid

Magnetic interchangeable inserts allow to use:

35/60 mm Petri
1x3 in. / 1x2 in. chambered slides
6-12-24-48-96 MW plates

Features:

Koelher lid for working under Koehler illumination
Optional lids available for Laser Safety, Injection during imaging
Flexible chamber height thanks to the removable chamber riser required to fit standard multiwell plates or to perform perfusion
Magnets allow easy interchange of chamber inserts
Magnetic locks hold Petri and Slides and MW in correct position inside the chamber

Available Inserts

H201-MW-HOLDER-NZ500	Multiwell plates holder
1x35-M	#1 35mm Petri-dish
1x35-PRIOR-NZ500	#1 35mm Petri-dish
1xGS-PRIOR-N-NZ500	#1 1x3in. chamberslide
1xLABTEK-PRIOR-NZ500	#1 Lab-Tek 1x2 in. chambered cover glass
1xLABTEK-II-PRIOR-NZ500	#1 Lab-Tek II 1x2 in. chambered cover glass
1x60-PRIOR-NZ500	#1 60mm Petri-dish
1xT25-PRIOR-NZ500	#1 Nunc and Greiner T25 flask
2x35-PRIOR-NZ500	#2 35mm Petri-dish
2xGS-PRIOR-NZ500	#2 1x3in. chamberslides
2xLABTEK-PRIOR-NZ500	#2 Lab-Tek 1x2 in. chambered cover glass
2xLABTEK-II-PRIOR-NZ500	#2 Lab-Tek II 1x2 in. chambered cover glass
2x60-PRIOR-NZ500	#2 60mm Petri-dish
4x35-PRIOR-NZ500	#4 35mm Petri-dish
GS35-PRIOR-NZ500	#1 1x3in. chamberslide and #2 35mm Petri-dish
LABTEK-35-PRIOR-NZ500	#1 Lab-Tek 1x2 in. chambered cover glass and #2 35mm Petri-dish
LABTEK-II-35-PRIOR-NZ500	#1 Lab-Tek II 1x2 in. chambered cover glass and #2 35mm Petri-dish
LABTEK-60-PRIOR-NZ500	#1 Lab-Tek 1x2 in. chambered cover glass and #1 60mm Petri-dish
LABTEK-II-60-PRIOR-NZ500	#1 Lab-Tek II 1x2 in. chambered cover glass and #1 60mm Petri-dish
GS60-PRIOR-NZ500	#1 1x3in. chamberslide and #1 60mm Petri-dish
6035-PRIOR-NZ500	#1 60mm Petri-dish and #1 35mm Petri-dish

Available LIDs

H201-KOEHLER-LID-PRIOR-NZ500	Glass lid that reduces the height of the chamber to 22 mm.It allows to work under Koehler illumination.
H201-INJECTION-LID-PRIOR-NZ500	Glass lid with two small openings (sealed with flexible plastic) to allow injection or permanent access to the specimen. Note: compatible only with specimen holder 1x35
H201-LASER-INTERLOCK-LID-PRIOR-NZ500	Glass lid with a safety switch that connects to the laser box. The switch turns off the laser, when the lid is lifted Note: compatible only with specimen holder 1x35

H201-PRIOR-NZ500-[KOEHLER-LID]_600x600.jpg — H201-PRIOR-NZ500 with Koehler Lid

H201-PRIOR-NZ500-[KOEHLER-LID]-[DIMENSIONS]_600x600.jpg — H201-PRIOR-NZ500 - Dimensions

H201-PRIOR-NZ500-[ADAPTERS-2]600x600.jpg — H201-PRIOR-NZ500 - Magnetic Inserts

H201-PRIOR-NZ500-[ADAPTERS]_600x600.jpg — H201-PRIOR-NZ500 - Magnetic Inserts

H201-PRIOR-NZ500 - Magnetic sample locks

H201-UP

Stage compatibility: fits on Upright Microscopes

Part number of the objectives in use must be specified in purchase order
XY stage model and serial number must be specified in purchase order

The chamber can fit:

35/60 mm Petri
1x3 in. / 1x2 in. chambered slides

Features:

Suitable for dipping lens
Manageable chamber thanks to the opening of the lid to introduce the objective
Magnets allow easy interchange chamber insert
Magnetic locks hold Petri, Slides in correct position inside the chamber
Perfusion holes: 12 channels for 2.0 mm O.D. tubings are available
To control the humidity into the chamber humidity module is recommended: HM-ACTIVE

Available Inserts

UP-1x35-M	#1 35mm Petri-dish
UP-1xGS-M	#1 1x3 in. chamber slide
UP-1xLABTEK-M	#1 Lab-Tek 1x2 in. chambered cover glass
UP-1xLABTEK-II-M	#1 Lab-Tek II 1x2 in. chambered cover glass
UP-1x60-M	#1 60mm Petri-dish

Available Drawings

H201-UP-[Exploded-OPEN]_600x600.jpg — H201-UP - Components

H201-UP-[ADAPTERS-1]_600X600.jpg — H201-UP - Available inserts

H201-UP-[LID-STANDARD]-[DIMENSIONS]_600x600.jpg — H201-UP - Dimensions

H201-PRIOR-NZ100-H117

Stage compatibility: fits on Prior NZ100/200 in Prior H117

The chamber can fit:

35/60 mm Petri
1x3 in. chambered slides
No insert is required

Features:

The chamber hosts #1 35mm petri or #1 chamber slide
Flexible chamber height thanks to the removable chamber riser required to perform perfusion
Perfusion holes: 12 channels for 2.5mm O.D. tubings are available in chamber riser

Available Drawings

H201-PRIOR-NZ100-H117_600x600 (2).jpg — H201-PRIOR-NZ100-H117 - 3D View

H201-PRIOR-NZ100-H117-[DIMENSIONS]_600x600.jpg — H201-PRIOR-NZ100-H117 - Dimensions

Cage Incubator

Easy access

Humidity Module

Black out Panels

LED inside

Gas Chamber

Gas Chamber

Gas Chamber

Gas Chamber

Sample Holders

OKO-Touch

T Unit

Gas Controller

Smart Box

H301-diSPIM

Koehler illumination ?

Perfusion ?

Different sample holder ?

H301-oSPIM

Koehler illumination ?

Perfusion ?

Different sample holder ?

H201-PRIOR-NZ500

H201-UP

H201-PRIOR-NZ100-H117

CONTACT US

Okolab S.r.l.

Okolab USA Inc.

Okolab Shanghai Co., Ltd.