H301-OLYMPUS-IX3-SVR

Stage compatibility: screws onto Olympus IX3-SVR Stage
 
 Magnetic inserts allow to use:
  • 35/60 mm Petri
  • 1x3 in. / 1x2 in. chambered slides
  • 6-12-24-48-96 MW Plates
Features:
  • Sliding lid for easy pipetting
  • Optional lids available for Kohler Illumination, Laser Safety, Injection during imaging
  • Lid: both the glass and the metal frame encasing the glass are heated. The metal frame uses electric resistances, and the glass is coated with Indium Tin Oxide (ITO) which is optically transparent and electrically conductive
  • Base: the metal frame of the base of the chamber is heated by means of electric resistances
  • Flexible chamber height thanks to the removable chamber riser and the optional Koheler Lid
  • Magnets allow easy interchange of chamber inserts
  • Magnetic locks hold Petri, Slides and MW in correct position inside the chamber
  • Perfusion holes: 12 channels for 2.5mm O.D. tubings are available in the chamber riser

 

H201-OLYMPUS-IX3-SVR_480x320.jpg
  

Available Inserts

6MW 6 well plates 6-MW.JPG
12MW 12 well plates 12-MW.JPG
24MW 24 well plates 24MW.JPG
24MW-NUNC 24-well NUNC/GREINER plates 24MW-NUNC.JPG
48MW 48-well plates 48MW.JPG
96MW 96-well plates. 96MW.JPG
MW-OIL Open frame to image multi well plates with oil immersion objectives MW-OIL.JPG
1x35-M #1 35mm Petri-dish 1x35-M.JPG
1xGS-M #1 1x3in. chamberslide 1xGS-M.JPG
1xLABTEK-M #1 Lab-Tek 1x2 in. chambered cover glass 1xLABTEK-M.JPG
1xLABTEK-II-M #1 Lab-Tek II 1x2 in. chambered cover glass 1xLABTEK-II-M.JPG
1x60-M #1 60mm Petri-dish 1x60-M.JPG
1xT25-M #1 Nunc and Greiner T25 flask 1xT25-M.JPG
2x35-M #2 35mm Petri-dish 2x35-M.JPG
2xGS-M #2 1x3in. chamberslides 2xGS-M.JPG
2xLABTEK-M #2 Lab-Tek 1x2 in. chambered cover glass 2xLABTEK-M.JPG
2xLABTEK-II-M #2 Lab-Tek II 1x2 in. chambered cover glass 2xLABTEK-II-M.JPG
2x60-M #2 60mm Petri-dish 2x60-M.JPG
4x35-M #4 35mm Petri-dish 4x35-M.JPG
GS35-M #1 1x3in. chamberslide and #2 35mm Petri-dish GS35-M.JPG
LABTEK-35-M #1 Lab-Tek 1x2 in. chambered cover glass and #2 35mm Petri-dish LABTEK-35-M.JPG
LABTEK-II-35-M #1 Lab-Tek II 1x2 in. chambered cover glass and #2 35mm Petri-dish LABTEK-II-35-M.JPG
LABTEK-60-M #1 Lab-Tek 1x2 in. chambered cover glass and #1 60mm Petri-dish LABTEK-60-M.JPG
LABTEK-II-60-M #1 Lab-Tek II 1x2 in. chambered cover glass and #1 60mm Petri-dish LABTEK-II-60-M.JPG
GS60-M #1 1x3in. chamberslide and #1 60mm Petri-dish GS60-M.JPG
6035-M #1 60mm Petri-dish and #1 35mm Petri-dish 6035-M.JPG

Available LIDs

H301-KOEHLER LID Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm H301-KOEHLER-LID.JPG
H301-INJECTION-LID Glass lid with two small openings (sealed with flexible plastic) to allow injection or permanent access to the specimen Note: compatible only with specimen holder 1x35 H301-INJECTION-LID.JPG
H301-LASER-INTERLOCK-LID Glass lid with a safety switch that connects to the laser box. The switch turns off the laser, when the lid is lifted Note: compatible only with specimen holder 1x35 H301-LASER-INTERLOCK-LID.JPG
H301-OLYMPUS-IX3-SVR-[SLIDING LID]_600x600.jpg
H301-OLYMPUS-IX3-SVR with Sliding Lid
H301-OLYMPUS-IX3-SVR-[KOEHLER LID]_600x600.jpg
H301-OLYMPUS-IX3-SVR with Koehler Lid
H301-K-FRAME-LID_600x600.jpg
H301-OLYMPUS-IX3-SVR - Available Lids
H301-OLYMPUS-IX3-SVR-[SLIDING LID]-[DIMENSIONS].jpg
H201-OLYMPUS-IX3-SVR with Sliding Lid - Dimensions  TIPA plate adapter not reported
H301-OLYMPUS-IX3-SVR-[KOEHLER LID]-[DIMENSIONS]_600x600.jpg
H301-OLYMPUS-IX3-SVR with Koehler Lid - Dimensions  TIPA plate adapter not reported
H301-OLYMPUS-IX3-SVR-[6MW]_600x600.jpg
H301-OLYMPUS-IX3-SVR - 6 MW Plate - requires chamber riser

H201-K-FRAME-ADAPTERS_600x600.JPG
H301-OLYMPUS-IX3-SVR - Magnetic inserts
H201-K-FRAME-ADAPTERS-2_600x600.JPG
H201-OLYMPUS-IX3-SVR - Magnetic insterts
H201-K-FRAME-MAGNETIC-LOCKS.jpg
H301-OLYMPUS-IX3-SVR - Magnetic sample locks
 
 

H301-OLYMPUS-IX-SUSP

Stage compatibility: screws onto IX-SUSP, GX-SVR, GX-SFR, BX3-SSU, IX2-SFR, IX2-SVL-2 - comes with Sliding Lid
 
Magnetic inserts allow to use:
  • 35/60 mm Petri
  • 1x3 in. / 1x2 in. chambered slides
Features:
  • Sliding lid for easy pipetting
  • Optional lids available for Kohler Illumination, Laser Safety, Injection during imaging
  • Flexible chamber height thanks to the removable chamber riser and the optional Koheler Lid
  • Magnets allow easy interchange of chamber inserts
  • Magnetic locks hold Petri and Slides in correct position inside the chamber
  • Perfusion holes: 8 channels for 2.5mm O.D. tubings are available in chamber riser.

 

H301-OLYMPUS-IX-SUSP_480x320.JPG
  

Available Inserts

1x35-M single #1 35mm Petri-dish 1x35-M-single.JPG
1xGS-M-single #1 1x3in. chamberslide 1xGS-M-single.JPG
1xLABTEK-M-single #1 Lab-Tek 1x2 in. chambered cover glass 1xLABTEK-M-single.JPG
1xLABTEK-II-M-single #1 Lab-Tek II 1x2 in. chambered cover glass 1xLABTEK-II-single.JPG
1x60-M-single #1 60mm Petri-dish 1x60-M-single.JPG

Available LIDs

H301-KOEHLER LID-2 Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm H301-KOEHLER-LID-2.JPG
H301-INJECTION-LID-2 Glass lid with two small openings (sealed with flexible plastic) to allow injection or permanent access to the specimen. Compatible only with specimen holder 1x35 H301-INJECTION-LID-2.JPG
H301-LASER-INTERLOCK-LID-2 Glass lid with a safety switch that connects to the laser box. The switch turns off the laser, when the lid is lifted. Compatible only with specimen holder 1x35 H301-LASER-INTERLOCK-LID-2.JPG
H301-OLYMPUS-IX-SUSP_600x600.jpg
H301-OLYMPUS-IX-SUSP with Sliding Lid
H301-OLYMPUSwithKoehlerLid_600x600.jpg
H301-OLYMPUS-IX-SUSP with Koehler Lid
H301-NIKON-TI-SR-Lids_600x600.jpg
H301-OLYMPUS-IX-SUSP - Available Lids

H201-NIKON-TI-SR-DIMENSIONS.jpg
H301-OLYMPUS-IX-SUSP- Dimensions with Sliding Lid
H201-NIKON-TI-SR-KOEHLER-LID-DIMENSIONS.jpg
H301-OLYMPUS-IX-SUSP- Dimensions with Koehler Lid
H301-NIKON-TI-SR-Adapters_600x600.jpg
H301-OLYMPUS-IX-SUSP - Magnetic Inserts
 
 

H301-PRIOR-NZ500

Stage compatibility: fits  on Prior NZ500 piezo Z-stages
 
The chamber can fit:
  • 35/60 mm Petri
  • 1x3 in. / 1x2 in. chambered slides
  • 6-12-24-48-96 MW plates
Features:
  • Uniformly heated by means of embedded electric resistances and is covered with a temperature controlled conductive glass lid
  • Magnets allow easy interchange chamber insert
  • Magnetic locks hold Petri, Slides in correct position inside the chamber
  • Perfusion holes: channels for 2.5 mm O.D. tubings are available in chamber riser
  • Removable riser to fit standard multiwell plates or to perform perfusion

H301-PRIOR-NZ500_420x380.jpg

 
 

Available Inserts

6MW-PRIOR-N500 6 well plates 6-MW.JPG
12MW-PRIOR-N500 12 well plates 12-MW.JPG
24MW-PRIOR-N500 24 well plates 24MW.JPG
24MW-NUNC-PRIOR-N500 24-well NUNC/GREINER plates 24MW-NUNC.JPG
48MW-PRIOR-N500 48-well plates 48MW.JPG
96MW-PRIOR-N500 96-well plates. 96MW.JPG
MW-OIL-N500 Open frame to image multi well plates with oil immersion objectives MW-OIL.JPG
1x35-PRIOR-N500 #1 35mm Petri-dish 1x35-M.JPG
1xGS-PRIOR-N500 #1 1x3in. chamberslide 1xGS-M.JPG
1xLABTEK-PRIOR-N500 #1 Lab-Tek 1x2 in. chambered cover glass 1xLABTEK-M.JPG
1xLABTEK-II-PRIOR-N500 #1 Lab-Tek II 1x2 in. chambered cover glass 1xLABTEK-II-M.JPG
1x60-PRIOR-N500 #1 60mm Petri-dish 1x60-M.JPG
1xT25-PRIOR-N500 #1 Nunc and Greiner T25 flask 1xT25-M.JPG
2x35-PRIOR-N500 #2 35mm Petri-dish 2x35-M.JPG
2xGS-PRIOR-N500 #2 1x3in. chamberslides 2xGS-M.JPG
2xLABTEK-PRIOR-N500 #2 Lab-Tek 1x2 in. chambered cover glass 2xLABTEK-M.JPG
2xLABTEK-II-PRIOR-N500 #2 Lab-Tek II 1x2 in. chambered cover glass 2xLABTEK-II-M.JPG
2x60-PRIOR-N500 #2 60mm Petri-dish 2x60-M.JPG
4x35-PRIOR-N500 #4 35mm Petri-dish 4x35-M.JPG
GS35-PRIOR-N500 #1 1x3in. chamberslide and #2 35mm Petri-dish GS35-M.JPG
LABTEK-35-PRIOR-N500 #1 Lab-Tek 1x2 in. chambered cover glass and #2 35mm Petri-dish LABTEK-35-M.JPG
LABTEK-II-35-PRIOR-N500 #1 Lab-Tek II 1x2 in. chambered cover glass and #2 35mm Petri-dish LABTEK-II-35-M.JPG
LABTEK-60-PRIOR-N500 #1 Lab-Tek 1x2 in. chambered cover glass and #1 60mm Petri-dish LABTEK-60-M.JPG
LABTEK-II-60-PRIOR-N500 #1 Lab-Tek II 1x2 in. chambered cover glass and #1 60mm Petri-dish LABTEK-II-60-M.JPG
GS60-PRIOR-N500 #1 1x3in. chamberslide and #1 60mm Petri-dish GS60-M.JPG
6035-PRIOR-N500 #1 60mm Petri-dish and #1 35mm Petri-dish 6035-M.JPG

Available LIDs

H301-KOEHLER LID Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm H301-KOEHLER-LID.JPG

H301-UP

Stage compatibility: fits on Upright Microscopes
  • Part number of the objectives in use must be specified in purchase order
  • XY stage model and serial number must be specified in purchase order
The chamber can fit:
  • 35/60 mm Petri
  • 1x3 in. / 1x2 in. chambered slides
Features:
  • Suitable for dipping lens
  • Manageable chamber thanks to the opening of the lid to introduce the objective
  • Magnets allow easy interchange chamber insert
  • Magnetic locks hold Petri, Slides in correct position inside the chamber
  • Perfusion holes: 12 channels for 2.0 mm O.D. tubings are available
  • To control the humidity into the chamber humidity module is recommended: HM-ACTIVE

 

H301-UP_480x320.jpg

Available Inserts

UP-1x35-M #1 35mm Petri-dish UP-1x35-M.JPG
UP-1xGS-M #1 1x3 in. chamber slide UP-1xGS-M.JPG
UP-1xLABTEK-M #1 Lab-Tek 1x2 in. chambered cover glass UP-1xLABTEK-M.JPG
UP-1xLABTEK-II-M #1 Lab-Tek II 1x2 in. chambered cover glass UP-1xLABTEK-II-M.JPG
UP-1x60-M #1 60mm Petri-dish UP-1x60-M.JPG
H301-UP-Exploded_600x600.jpg
H301-UP - Components
H301-UP-[ADAPTERS-1]_600x600.jpg
H301-UP - Available inserts 
H301-UP_DIMENSIONS_600x600.jpg
H301-UP - Dimensions
 

H301-PRIOR-NZ100-H117

Stage compatibility: fits on Prior NZ100/200 in Prior H117
 
The chamber can fit:
  • 35/60 mm Petri
  • 1x3 in. chambered slides
Features:
  • The chamber hosts #1 35mm petri or #1 chamber slide
  • Flexible chamber height thanks to the removable chamber riser required to perform perfusion
  • Perfusion holes: 12 channels for 2.5mm O.D. tubings are available in chamber riser

 

H301-PRIOR-NZ100-H117_480x320.JPG

Available Drawings

H301-PRIOR-NZ100-H117_600x600 (2).JPG
H301-PRIOR-NZ100-H117 - 3D View
H301-PRIOR-NZ100-H117_600x600.jpg
H301-PRIOR-NZ100-H117 - Components
H301-PRIOR-NZ100-H117-[DIMENSIONS]_600x600.jpg
H301-PRIOR-NZ100-H117 - Dimensions 
 

COPYRIGHT © OKOLAB S.R.L. ALL RIGHT RESERVED. CERTIFIED ISO 9001.